4 Pieces Aspiring Dental Syringes 1.8ml C-W Type Anesthetic One Ring With Finger Rests Surgical Dental Instruments German Grade Dental Anesthetic Syringe High-Quality dental anesthetic delivery system. The syringe handle and thumb rings are designed for a natural fit. The tip of the harpoon is designed for aspiration every time. These are performance instruments. Several models of syringes are available for anesthetic delivery. Made with high-quality German Stainless, 1.8 cc inch thread. SET INCLUDED:‣ 4 – Pcs Anesthetic Syringe Self-Aspirating 1.8CC REASON TO BUY OUR QUALITY PRODUCTS: 1. Same Day Dispatched.2. Answer customer Questions we try to answer within 6-hour 24 hours 7 days a week.3. Combined Postage Discounts on all items.4. Guarantee against manufacturing defects.5. 100% Satisfaction Guarantee.6. Our Images are of actual items Day lite shoots so you be confident that what you see is what you get in Post.7. we will refund 100% of your payment reason if the item does not meet your requirements. TERMS & CONDITIONS:Payment Method: We accept payments via PayPal, Credits cards, Bank transfers, etc.Customer Satisfaction: We have full confidence in our products and hope you will buy them with confidence as we have. We stand behind all of our items with a 100% Satisfaction Guarantee. FEEDBACKS:If for some reason you are not satisfied with the purchase, please contact us as soon as possible to resolve the matter rather than leaving us a negative feedback. We will definitely satisfy you. Also please leave us positive feedback if you are satisfied with the purchase and we will do the same for you. RETURNS: Return accepted within 30 days of purchase. Buyer pays for return shipping.You may return orders unused, in new condition, and in the original packaging100% refund or replacement will be issued as per your demand.
Item Tag: Catheter Tip
-
DENTEX Dental Light Cure Composite Resin Syringe/Composite Material Heater USA
Universal Composite ResinSpecifications:* Universal composite for anterior/posterior dentine and enamel* High radiopacity* Fluoride release.* High strength (compressive strength>480MPa)Indications for Use:* Direct anterior and posterior restorations* Compatible with glass ionomer resin material* Cup buildup* Core buildup* Indirect anterior and posterior restorations including inlays, onlays and veneersColor Available:A1, A2,A3, A3.5, and B1 Medium Flow Composite ResinDescription:1. Medium Flow: Small, shallow cavity restorations; base/liner under restorations.2. Liner, flexible reduce the occlusal stress.Advantages:1. Excellent polishing feature and strength.2. Radiopaque.3. Fluoride releasing.Color Available: A1, A2, A3Package：Syringe*3gTip*5English operation manualDual Cure Composite ResinDual Cure Excellent flow consistency High flexural strength High compressive strength Dual cure (light and self cured) It is light cured in a few seconds Shade:A2/ A3 Packing: 1X 8.0g Syringe 5 X Mixing Tips 5 X intraoral TipsTemporary Composite ResinDescription:Light Curing temporary Composite Resin Used before dental prosthetic installation as temporary filling material to isolate prepared dental cavities from the extreme oral conditions.Light curing composite resin in adequate release to be directly discharged to the dental cavities through disposable tip for easy apply.No easily deviation till dental prosthetic installationSingly and wholly removedNo dentritus inside dental cavities after removalExcellent sealing ability adhesive to the side of dental cavitiesEasy checks for leftover after removalElasticity allows masticatory some degreeApplications:Temporary restoration for inlay, on lay cavityTemporary obturation of implant screw access canals.Blocking temporary sealing，Excellent sealing ability.The filling color is blueExpires in 3 yearTemporary Light Cure Cuomposite is not indicated for use as temporary crown and bridge material.1.RECOMMENDED USETemporarily fill the cavity(1). Preparation, relining and impression taking are done as usual.(2). Clean and dry the cavity.(3). Place and model a sufficient amount of DX.TEMP into the cavity using a suitable instrument.(4). Light-cure layers with a thickness of up to 5 mm for 20 seconds, layers with a thickness of up to 7 mm for 40 seconds. Fill and light-cure deeper cavities in layers.(5). Remove excesses, shape and finish as usual. Polishing can be done with a polishing paste using polishing cups or discs.Removal of the temporary inlay(a). Insert a suitable instrument such as a probe or a scaler into the temporary inlay and extract the material from the cavity, preferably in one piece.(b) Clean the cavity with a rubber cup/a small brush and cleaning paste.2.CompositionInorganic and organic filler in a matrix of multifunctional acrylates; catalysts, stabilizers, additives.Free from methyl methacrylate and peroxides.3.Technical specificationsShore-D hardness≥40Packing list:2.5g Syringe5 TipsComposite Resin Heater Product description: Resin heater is designed for heating composite resin material to improve the flow of its adhesive properties. At the same time it can also be used to heat adhesive when used manual equipment, filter cover. 1- Light filter; 2- Heating plate; 3- Heating main body; 4- Resin base; 5- Temperature indicator; 6- Temperature selection and the on / off button; 7- DC power. Operation: 1. DC Plug the power adapter into the external socket to connect the power; 2. Green light is shining after the power supply the default temperature of 40 ℃; 3. One key operation, three temperature precise adjustable: 4. When the green light is standing, the temperature is 40 ℃; 5. Once again the key shows the yellow light shining, and the representative continues to heat until the yellow light is often bright and the temperature is 45 ℃; 6. Once again the key shows the red light shining, and the representative continues to heat until the red light is often bright and the temperature is 50℃TemperatureLight colorHeatingReached the preset temperature40℃GreenShiny Green LEDGreen LED often bright45℃YellowShiny Yellow LEDYellow LED often bright50℃RedShiny Red LEDRed LED often bright Notice: Quick flash means heating up, when the temperature reaches 50℃, then press the key it can be cooled to 40℃; The light slowly flashes when cooling down. Cleaning and disinfection All the parts can be disinfectant cloth to wipe clean. Don’t take any part in any liquid immersion disinfection. Not 135℃ sterilization Technical parameters: Power adapter Input : 100-240V AC 50/60Hz Output : 12V 3A Payment We accept PayPal Only! All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don’t buy an item if you can’t/won’t pay for it. Paypal is the easiest way to pay for items on eBay. Please make sure your Paypal and eBay accounts have the same physical address used for delivery and the same e-mail address to ensure payment confirmation. Shipping: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Return If the item you received is damaged or defective,Please message to us immidately.We will free exchange or refund. We will pay the return shipping costs if the product is defective or the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping charges. You can return your purchase for up to 15 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in the original packaging, everything must be in new condition, No missing parts. Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding! Shipping The goods you odered will be posted out in the second working day after the paymet has been made. (We will inform you via email if any delay occured due to holiday events. General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal. Feedback You feedback is VERY important to usPlease leave us positive feedback, an positive feedback will be automatically left for you once we receive your full payment. Please leave us with any concerns prior to leave negative feedback, as we can only correct issues when we are aware of them. We understand the concerns and frustrations you might have, and will try our best to resolve the isuues. Serivce is our #1 priority at BAISTRA!If you message us immediately after placing the order, we will make every effort to assist you with your change request. Unfortunately, we can not make changes or cancel an order once it has shipped. We offer the best items at the best prices. We strive to exceed all your expectations and put a smile on your face. Your experience will be a pleasant and effortless one when you buy at BAISTRA. We stand behind our products and pride ourselves on OUTSTANDING customer service. We guarantee that you will be delighted with your purchase or we will gladly and promptly issue you a refund or make things right! On Jun 14, 2023 at 20:22:39 PDT, seller added the following information: FDA for Tooth Bonding: 510(K)Number: K232978, Regulation Number: 872.3200, Product Code: KLE FDA for Resin: 510(K)Number: K180463, Regulation Number: 872.3690, Product Code: EBF This product expires on 05/2025 or better.
-
Dental Light Curing Adhesive Resin For Bonding Resin & Ceramic Materials 5ML
Describe： This product is a one-component liquid, and its main ingredients include UDMA and other multifunctional methacrylic resins. It does not contain solvents and inorganic fillers, and is safe and harmless to the human body. The product is a light-curing adhesive material, which is clinically used for the bonding of dentin and enamel. Suitable for bonding resin materials and ceramic materials. Scope of application： Used for bonding dentine and enamel with resin and ceramic materials. Clinical operation steps: 1. Pretreatment of caries and pulp protection. 2. Use 37% phosphoric acid etchant for treatment, then clean it thoroughly with water, and dry it thoroughly with an oil-free air gun. 3. Apply a layer of adhesive evenly on the tooth surface with a small brush. 4. Make the adhesive layer even as far as possible with the wind power of the air gun. 5. Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive. 6. Please use the composite resin filling material according to the original manufacturer’s instructions, as well as the subsequent grinding and reconstruction processes. Precautions： 1. During clinical use, the lip and adjacent teeth should be well isolated and protected. Avoid contact with eyes, mucous membranes and skin. 2. Phenols, clove oil and zinc oxide can not be used as the bottom material of the first layer,because clove oil contains polymerization inhibitor “phenolic substances”, which will directly affect the degree of polymerization of the adhesive. 3. During the curing operation, the distance between the surface of the light curing lamp and the adhesive should be kept below 2mm, but it should not be in contact with the material. 4. Before applying adhesives and composite resin fillings, the tooth treatment surface should avoid contamination by water and other impurities. 5. It is not suitable for pulp capping, and patients who are allergic to resin should not use it. Environment： This product is operated at room temperature. Storage Conditions： This product should be stored in a cool and dry place at 2°C~28°C, avoiding direct sunlight. Shelf Life： This product is valid for 2 years, please do not use expired product. Contraindications: Patients with a history of allergy to methacrylate resins are contraindicated. FDA Statement The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Seller name: Baistraworld City,State:SHENZHEN,China Telephone number: 0755-62289361
-
Dentex Dental Cure Light Resin Adhesive Bonding Dentin Enamel 5ml
It does not contain solvents and inorganic fillers, and is safe and harmless to the human body. Suitable for bonding resin materials and ceramic materials. Irradiate with an oral light curing light source of 300mW/c ㎡ for 20 seconds to cure the adhesive.
-
1-100X Dental Acid Etch Etching Gel 37% 5ml/syringe
The etching gel is a polymer thickened gel for use on enamel and dentin. This gel will effectively treat enamel and dentin, producing the necessary microretentive surface for successful bonding. The polymer thickener creates thixotropic properties, enhancing handling characteristics. The etchant rinse away cleanly and quickly, leaving no residue. Packages: Refill: 5 ml/syringe, Instruction X1 Indications:Treat dentin and enamel, treating agent on dental restorative material 1. Isolate tooth and then prepare the cavity in a conservative manner. Clean the entire surface with a slurry of pumice and water. 2. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. Allow etchant to remain in palce for 15 seconds. etching time should be monitored with a stopwatch. Begin timing at the end of application. Option: place etchant enamel first, then proceed to cover dentin, for a slightly longer enamel etching time 3. Rinse thoroughly (at least 5 seconds) to completely remover all traces of etchant. 4. Remove exces moisture from the tooth and proceed with the applicaton of etching gel, waiting for 10 seconds, then rise thoroughly, then apply adhesive. FDA Statement: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item Seller name: dentslyCity,State:SHENZHEN,ChinaTelephone number:0755-36254803
-
AMSINO AMSure AS116 Piston Irrigation Syringe – 30 Count
Manufactured by Amsino and originating from China, this syringe has an expiration date of 2030, ensuring long shelf life for convenient use in various healthcare, lab, and dental applications.
-
Amsino AS116 Piston Irrigation Syringe 60cc 30 Count box
This box contains 30 units of the Amsine AS116 model, manufactured in China. Box opened for photo purpose only.
-
Lot of 6 Disposable Syringes w/ Catheter Tip 150ml
The product is a lot of 6 disposable syringes with a catheter tip, each holding 150ml of fluid. These syringes are intended for use in dental, medical, and biological laboratories. The expiration date for these syringes is 2022/06/28, ensuring they are fresh and ready for use in various laboratory settings. The catheter tip design allows for precise and controlled injections, making them a valuable tool for professionals in these fields.
-
Easy Glide 60ml / 60cc Catheter Tip Disposable Syringe with Covers (Pack of 50)
LEAK-PROOF & STERILE – Each syringe is individually wrapped to ensure safety and consistent quality.